Nowadays, there are not a few people who attach importance to health sports. As long as they have free time, people will go to the badminton hall to exercise, relieve the pressure of work, and let their mood be relaxed. Therefore, the construction of badminton halls has become the meat in the bowl in the eyes of many investors. So, what should be paid attention to in the lighting design of badminton stadium? Now, I will analyze it in detail.

Lighting design of indoor badminton hall:

I; The lighting scheme design of badminton court generally adopts low brightness lamps, which are installed at both ends of the tennis net. The light source should preferably be a fluorescent lamp with soft light. The projection of the lamps should enable the light to shine on the court and the space on the court, and there should be enough light overlap. The installation height of the lamps should not be less than 8m. In order to ensure a certain brightness around the court, A part of lamps shall be installed around the field. The light of these lamps shall be kept away from the normal line of sight of the athletes, and shall be installed 10 m away from the outside of the field horizontally and longitudinally.

Two; The reflectivity of the wall and ceiling of badminton venues should meet the following requirements: 20% for the rear wall, 40-60% for the side wall, 60-70% for the ceiling, and there should be no patterns and patterns on the wall.

Three; Fluorescent lighting is recommended in the old manual. Metal halide lamps should pay attention to controlling glare. The height should be more than 11 meters, and the horizontal position should be 1 meter away from the edge of the site.

Four; If it is a slightly more professional venue, try to avoid the use of downlit metal halide lamps. High output light will cause severe discomfort when athletes serve and receive the ball.

Five; It is suggested to arrange lights on both sides, pay attention to the control of the projection angle of the lights, and never arrange lights in the line of sight direction where players may receive and hit the ball. If there is a referee position in the net area, the projection angle and installation height of the lights should be better controlled.

The above is a detailed analysis for everyone, and I hope it can help you.

Badminton hall construction (www.yumaoqiuguan. cn)