Shengshi Yuwei brings you the paving method of the PVC floor of the badminton hall. We hope that our expertise can help you. If you need to contact Shengshi Yuwei, we will provide you with full service.
lay PVC floor of badminton hall The ground must be cleaned before. The floor shall be laid on the floor 24 hours in advance, and the site temperature shall not be lower than 15 ℃. After the floor is restored, an additional 5cm shall be left at both ends when cutting.
Floor glue pavement of mobile badminton hall: the ground and the ground are bonded together with the special single-sided connecting belt provided by the manufacturer. The floor and the floor are not glued together to facilitate future movement.
The local fixing and paving method of badminton hall floor: according to the floor sideline, brush 10cm adhesive inward on the ground for bonding, or use the special double-sided adhesive tape matching with the manufacturer for bonding.
The above is the paving method of the PVC floor of the badminton hall that Shengshi Yuwei brought to you. We hope our expertise can help you. If you need to contact Shengshi Yuwei, we will serve you throughout.
Badminton hall floor glue （ //kingmould.cn ）
