The correct key points of badminton hall floor laying can not only extend the service time of the floor, but also ensure the formaldehyde pollution caused by poor auxiliary materials. Generally speaking, the common construction methods of floor pavement include direct bonding method, suspension pavement method, non adhesive suspension pavement method, non floor cushion method, keel pavement method and keel wool floor pavement method.

The floor board of badminton hall is usually laid with keel, and the laminate floor is usually laid with direct bonding. PVC floor can be bonded with special environmental adhesive under good ground conditions, and can be used 24 hours later, which is very convenient and efficient.

Key points of badminton hall floor laying

Badminton hall floor Do not pave with large or small gaps, and do not use concave and convex lines to pave the floor. If the gap or line is obvious, it is easy to trip due to uncomfortable feet. In particular, it is recommended to strictly install the badminton hall floor. Its joints are very small and cannot be seen from a distance. If seamless welding technology is adopted, it can also achieve complete seamless, which is impossible for ordinary floors.

After the floor of the badminton hall is paved, it has not been completed and needs strict and careful acceptance. The floor acceptance mainly checks whether the floor color is consistent, whether the floor has echo, whether the floor is deformed, warped, etc. At the same time, attention should also be paid to the health and safety of auxiliary materials. It is recommended that everyone carry out pre paving before paving to ensure the paving effect.