For the engineers and Party A of the badminton court, they hope that the lower the price of the wooden floor of the badminton court, the better. But the premise is to ensure the professional quality of the badminton hall floor. We all know the principle that every penny counts. It is unacceptable to clearly show that the price is lower than the production cost of the badminton hall floor. Relatively speaking, badminton hall floor manufacturers can provide the market with cost-effective badminton hall floor products and services by virtue of their strong, solid, real strength and scale effect.

There are many systems in the playground. First, from the cost of the stadium itself. The main structure of the common sports floor of the single keel gymnasium is the panel and keel, which are the two main structures affecting the system. The keels of different badminton halls have different structural forms, and the prices of badminton hall floors are also different.

The overall structure of the sports wood floor is from top to bottom, from the upper PVC floor, moisture-proof course, wool floor, keel, to the bottom green mat, which is indispensable. Each component plays an important role. It is worth noting that the base of the sports wood floor is the most important. Before construction, special attention should be paid to the damp proof work of the stadium. In conclusion, high-quality indoor sports wood flooring should be selected from the main performance characteristics of indoor sports wood flooring

The structure of the sports wood floor is as follows: one layer: rubber mat, leveling, sub floor; The concrete ground shall be leveled, the site shall be thoroughly cleaned, and then paved. Second floor: install upper keel and lower keel; When installing the upper keel and the lower keel, attention should be paid to the position of rubber skids at the ends of the upper keel and the side keel. The wall and adjacent keels, the upper keel and the lower keel and the wall should have certain holes to meet the requirements. Three layers: plywood pavement: the plywood pavement angle meets the preset requirements of the drawing.

The end of the frame shall be cut neatly, and the end shall be flush with the upper and lower keels. Fourth floor: install moisture-proof film, choose moisture-proof non-toxic film, lay and repair the moisture-proof protective layer along the keel direction. There shall be no holes, eyes or tears on the surface of the coiled material. Otherwise, it should be repaired to achieve moisture-proof and sound absorption and greatly improve the performance of the floor. Fifth floor: install and maintain the panel. Before installation, check the quality of the panel, skirting board line and vent.

In various sports floors, Badminton hall floor A little expensive. Therefore, if you choose this product, we must pay attention to the daily maintenance in daily use. However, the real sports floor is very expensive, because its quality is very good, very solid. Sports floor can be divided into many types, among which pvc sports floor is very popular. In addition, pvc floor is also an important part of badminton hall facilities. If this part is done well, the fun of sports can be reflected.