上海龙凤花千坊

Opinion information

Today, I bring you some tips for repairing the badminton hall floor

Time: October 28, 2019 Category: industry information Views: 1428
Share to:

If the scratches on the stadium floor are very deep, we do not recommend polishing and waxing, because the composite pvc coiled material floor has a wear-resistant layer and a printing layer. If the printing layer inside is easy to polish, the color of the ground will be damaged.

In sports courts or badminton halls, pvc coiled material floors are always worn or scratched during use. Today, let's introduce the repair method of PVC coiled material floor in detail.

 

 

1. The multi-layer composite pvc coiled material floor has scratches in use. We should decide the plan according to the actual situation on site. If the scratches are not deep, we can first clean the floor and wax it, then use an appropriate amount of wax washing water to clean the ultraviolet rays and dirt on the original pvc coiled material floor, use a grader to clean and polish the floor, use a vacuum cleaner to clean the dirt on the floor, and then polish it with wax. When waxing, high-quality wax water shall be sprayed on the floor, and high-speed polishing machine shall be used for polishing. After the wax water is dried, the second time shall be started. This effect will be more obvious.

 

2. If the scratches on the stadium floor are very deep, we do not recommend polishing and waxing, because the composite pvc coiled material floor has a wear-resistant layer and a printing layer. If the printing layer inside is easy to polish, the color of the ground will be damaged and irreversible damage will be caused. In this case, we recommend replacing the PVC coiled material floor locally.

 

3. The repair of homogeneous permeable pvc coiled material floor is relatively simple, because the structure of homogeneous permeable pvc coiled material floor is the same inside and outside, and the surface layer and bottom layer are identical. If scratches occur, we will use cleaning, polishing and waxing methods. When polishing, use ultra-fine abrasive paper to polish 1200 mesh, 1000 mesh and other abrasive paper to avoid accidental damage.

 

4. There is a better way to repair the badminton hall floor. The original floor is also polished after cleaning. The surface layer is then finished at the end using a polymer material, which is similar to automobile electroplating. This method will extend the service life of the badminton hall floor, and the repairing effect of the badminton hall floor will be more obvious.

 

Through the above four Badminton hall floor The repair method can completely solve the scratch and wear repair of the PVC coiled floor in the daily use of the stadium. Although the repair of the PVC coiled floor will have a certain effect, our suggestion from the manufacturer of the PVC coiled floor is to pay attention to the care and regular maintenance in the daily use. Don't wait for problems to find a way to repair the PVC coiled floor. This has some disadvantages more than advantages, The use cost will also increase.
 

stay
Line
Consulting
Inquiry
National Service Hotline
400-821-6852